Calidad, control de calidad , sqe

-Responsible for more than 2,000  Suppliers raw material conditions received at Hermosillo Plant from Worldwide Companies of different commodities.
-Responsible for FAI approval process and Suppliers training more than 350 Part numbers-direct material in the last 2 years.
-Lead Auditor of AS9100 Rev. D Certified to develop Suppliers In site Audit for Capacities and Capabilities validation under ISO 9000:2015 Environment.
-Daily Meetings for MRB Coordinate with 15 Quality Engineers and 10 Engineering Staff for Non-Conform Material status and final disposition with RMA recovery costs of $1.2 Million USD for rework or replacement parts for past FY2017.
-Responsible for all the new raw Material Certification under FAI submission and Approval and FAI Approvals  for 5 Million Cost Saving project 
-Responsible for FAI training for multicultural suppliers at different Countries Notth America, Europe ,Asia and Mexico to submit FAI Approval.
-Responsible for Annual Suppliers Audits, visit follow up and critical rejection that affect Customers operations.
-Weekly Meetings with Product Eng, Manufacturing Eng, Procurement and Quality Global staff and New Project Introduction.
-Monthly Meetings with 3 Suppliers as minimum to  follow up and Supplier Focus Review  performance Meetings.
-Direct Customer support for Rejections and Supplier Root Cause Analysis and Corrective Action to be taken and follow up.
-TE Supplier DM Tech Administrator for Quality rejections notification and Corrective Actions Follow up, including validation and Effectiveness of Actions taken
-TEOA Monthly Supplier Fast Response Board administrator, SAP under Q-Notices processunder SAP and Supplier QR process under TECH´s system.
-KPI’s FY goals follow up as DLPM’s, FAI Approvals, Customer Disruptions, Supplier Development, COPQ charges, NPI, NSI, etc.

- Responsible for Molding (Injection, Over, Insert, Seals, Extrusion, Silicone, thermoset), Machining (Screw & Custom) Plating and springs commodities for 9  
  Business Units at TE Connectivity as Supplier Development Engineer to support Scouting and development for new supplier in Mexico as LCL Strategy. 
- Lead Auditor for Supplier Quality System Audits on AD&M, Medical and Auto BU, including Action items follow up meeting to close all the finding with their     
  Proper Corrective action in place.
- Weekly KPI´s follow up through DM Tech system and Cognos to know Supplier development under Mexico Operations.
- Supplier Level Validation Program to improve Supplier performance thru Evaluation and Action plan development as continuous improvement for a Solid Supplier   
   Data base.
- Systems development for Supplier Development Department to define and improve our Current Process into TE Connectivity System as Standard work to get Start      
   Level 5 from TEOA Program.
- Target tracking file weekly follow up for Project pipeline assigned to hit goals and strategies defined by IPO with Business Units agreement.
- Continuous visits to review Expertise, Capacities and Locations for Potential Suppliers at Sonora and Baja California Locations to Increase Supplier data base on  
   Mexico Area.
-  Participation for FAI´s, FAAR´s, PPAP´S parts review and validation before send to Business Unit as internal Customer for Molding, Machining, Springs  and    
   Plating parts including an advance planning program as Plan for every part process approval until launch and ramp up process.

- Responsible as Central Position for 7 IAC Plants as Mexican operations, Supplier development, also for all the Suppliers P.P.A.Ps approvals at CD4program:   
  CD391 FORD FUSION/CD533 LINCOLN MKZ, Including in site validations for Phase Zero and Full PPAP approval, coordinate with Suppliers different launch   
  Phase to provide material and documentation required during launch process. Claims, non-conform material and prototypes material handling administration. 715  
  PPAP´s approved, 100 Different Suppliers, 662 part numbers for CD4 program.15 Supplier Quality Engineers from 7 IAC locations (In direct)
-Q1 team member and Participation doing assessment for CD3 program to get the Certification at FORD Hermosillo, Sonora .Mexico 2010.
- Molding process participation as Quality Engineer improving Quality levels to met and exceeds Customers Target by Quarters thru 2010.
  9 Quality Inspectors on 3 Shifts under charge (Direct).
-  Participation as Problem Resolution Team Member solving   problems with deep process analysis and corrective actions to reduce final Customers warranties with  
  82% of improvement on 2010. 12 Quality Inspectors on 3 Shifts under charge. (Direct).
- Responsible for IP Commodity as Quality Engineer making improvement to reduce Quality rejection on 2009 from 18 QRs thru 3 QRs, working as work team with   
   IAC People and FORD key players to improve and get best in Class/best in FORD for FORD FUSION 2010.
-  0/100 Program implementation at IAC Hermosillo IP Commodity on 2009 as part of Improvements strategy to reduce defects and attack root causes as inputs.
   9 Quality Auditors on 3 Shifts under charge. (Direct).

- Responsible for all the In-process Quality System on molding parts, Reservoirs and hose for harness build through extrusion process area, including corrective   
  Actions request, giving a proper follow up on training and coordinate the solving problem process, analysis reports for our customers (internal/external), process   
  Deviations, Alerts, Full support for all the Customer Quality requirements, exceeding Customer expectations including the ISO/TS 16949 Certification system as   
  Internal auditor, working with 100 people group on three shifts to coordinate through ISO system and Quality System implemented. Assuring the right solutions and  
  Collect all the records required as evidence by the Customer and Quality System implemented. Team member for continuous improvement program and Advance   
  Planning Quality 
-  Process for Planning, Coordination and implementation on new products validation, Customer approval and then release to mass production. 10 Quality Inspectors on 3 Shifts under charge (Direct).

-  Responsible for all the raw material received thru Incoming Inspection department and their process until finished good materials are delivery as Cooling Modules
   To FORD HSAP with 1200 parts provided every day.
-  Responsible for all suppliers Quality levels on site from Brazil, U.S.A. and Mexico thru continuous improvement and supplier development to improve quality
   Levels from 50,000PPM´s thru less than 100 PPM´ s until now. Working with supplier in a work-team atmosphere to get result in a short period of time. Also
-  PPAP resubmission audits as part of process and product validation on suppliers location in order to know the entire process and validate by mean of run and rates
   Process and PPAP level 5 for each part number supplied to our Plant.
-  8 Disciplines follow up for all the supplier defective material reported  in order to get supplier corrective actions and prevent recurrences by mean of effective  
   Results for each failure mode reported.
-  Responsible for the calibration department coordinating the external and internal calibration control for each equipment used on our assembly process. Supplier
   Scorecard monthly giving a continuous feedback and keep good level communication between supplier tiers II as Supplier tier I level.
-  ISO/TS 16949 internal auditor and coordinator to get as previous status thru internal audits until get ISO/TS 16949 Certification received on 08/09/06 with 1 minor
   Nonconformance in the audit made by third party certification company (DECKA) Germany Company.
   3 Quality technicians under Charge (Direct).

-  Responsible for continuous improvement in manufacturing process through different tools applied to transform a Lean manufacturing and maintain Quality
  Standards to satisfy and excesses customer expectations by mean of customer feedback in the different manufacturing facilities located in Empalme.
- Responsible for release of new production lines, special equipment as clue stations, Electrical boards and go no go gages to assure the Quality according FORD,   
  GM, CHRYSLER Specifications Maintain proper calibrations and verification to all the tools and machinery involved in the production process. Keep company  
  PPM’s goals through effective corrective actions and continuous feedback implemented in each manufacturing line. Planning and develop of new methods to   
  Performance the production process for new products. Release of new electrical test boards and dimensional through Quality instructions and process. Responsible  
  Of Quality department for new program in plant #8:
-  P221 (358), New FORD program for F-Series; GMX367, New GM program for GRAND Prix platform; BOSCH, New GM program for Malibu ABS System;
  MUSTANG, Permanent FORD program complete platform; MAGNA New GM program for CADILLAC CATERA platform; JCI, permanent program for    
   Miscellaneous for interiors systems as TIER I.
- Supervisor and training of Quality technicians., Internal ISO/QS 9000 auditor., Control plan instructor for training.
- SRM program implementation (material revision system) in the production floor shop, in order to maintain low inventories in QC Hold cages and drive all the non-
  Conform material by mean of RMA’s process to raw material. Planning develops and coordinate re-certification program for two plants in Empalme location   
  Through quality tools to assure performance and customer expectations.
- Perform S.Q.A. procedures and work instructions. Applying Lean Manufacturing in IP harness production line to reduce time and cost.
- Responsible of core team coordination to create all the APQP documentation and solve 8 Disciplines, 5 Steps and attending Customer complains reported.
- Keep the quality and production levels within goals (productivity, PPM’s) through continuous improvement and teamwork.
  8 People under charge, 2 Quality Engineers, 2 Q.A. technicians, 3 Quality Auditors, 1 Scrap outsourcing associates (Direct).

- Responsible to keep the quality systems for HONDA, MMMA and CAMI automotive for GM program assigned to a new seat belt   
  Automotive lines in order to improve the Quality and delivery to customers with continuous feedback for manufacturing plant in Mexico. Also responsible   
  For PPAP’s & ISIR’s submitted   and get the approval.
- Lead core team to provide Corrective actions request and Quality Rejections from Customers complains and applying Poke yokes and Continuous improvement to  
   Exceed Customer Expectations through effective corrective actions and follow up.
- Quality support on site at United States on Distribution Center to assure and keep the quality levels required during transfer operations from Agua Prieto, Sonora to  
  Monterrey, N. L.
- Work instructions and qualifications build of new products models (restrain systems).
 - New formats implementation to perform the Quality scores as an internal continuous feedback and continuous improvement.
- Keep all the Quality paperwork required by the customer in order to satisfy the product approvals and continuous engineer changes generated, ejecting in  
Coordination with design team. 3 Quality Auditors under Charge (Direct) and 4 Quality auditors in field ar Distribution center.

Quality and Productivity.
Green Belt Certification developing Cost saving proyect by PROSIGMA .
Projects administration by Tec Milenio

Bilingual Industrial Engineer with experience in Mexico Global manufacturing automotive  and Aerospace environment dealing with people from diverse cultures and nationalities. Creative, Open minded, capable and firm when taking decisions, Continuous improvement, Quality Leadership training and employee performance and behavior to create a work team with an urgent sense environment required reaching the company yield successful. 
To acquire one of many challenging positions within your company as a facility coordinator, Quality sr. engineer and Supplier Quality sr. Engineer experience in the Automotive, Aerospace environment and Quality Assurance Assistance for 100 OEM Suppliers for Molding and Assembly Automotive company that is working under ISO/TS16949:2009 and AS9100 systems to getting a continuous improvement on their process.
I am knowledgeable and well- rounded in Quality on Customer requirements and Leadership, Human Resources, Customer Service, all of which I have experience. I am multitasked and functional to acquire various positions applicable to my education, bilingual language abilities, work experinces, and others with the proper training. Accustomed to work under FORD, GM, CHRYSLER, HONDA, MMMA, NISSAN, CAMMI, and SIA Systems.
Good relationship with Key players of different business unit to Meet and exceed Customer Expectations and hit the goals require as Business Unit strategy for current fiscal year. Continuous improvement implementation for daily activities as standard work.